Advertise on Shadowville
You must be logged in to post
Search Forums:


Construction waste crusher belongs to the class of building equipment


2:44 am
November 7, 2017



Posts: 118


Construction waste crusher (commonly known as rotary kiln), belongs to the class of building equipment, is one of the main active lime production equipment, and it’s mainly used to further roast and pre-heat materials to achieve the maximum decomposition of materials. The cylinder of construction waste crusher is made up of rolled steel, and the refractory lining is designed for cylinder body, which is located in a pre-determined inclination with the horizontal line supported by two wheels. One ring gear is fixed on the inner cylinder near the discharging part and spring plate, under which there is a pinion meshing. construction waste crusher is widely used in roasting dolomite, kaolin, bauxite, refractory material, cement, limestone, titanium powder, alumina, mineral, activated carbon, coke, magnesia, zinc oxide, special cement, etc.
construction waste crusher can be pided into cement kiln, metallurgy and chemical kiln, lime kiln, titanium dioxide calciner kiln and talc powder calciner kiln, and the cement kiln can be pided into dry tppe cement kiln and wet type cement kiln, which is mainly used for calcining cement clinker. Metallurgy and chemical kiln is mainly used in magnetic roasting of iron ore in steel plant and metallurgical industry; oxidizing roasting of chrome, nickel and iron; roasting of high alumina of vanadium bauxite and aluminum clinker, aluminum hydroxide in refractory plant; roasting of chrome ore and chromium ore and other minerals in chemical plant. Lime kiln (i.e., active lime kiln) is used for roasting active limestone and light burned dolomite in steel plant and ferroalloy plant.


11:31 pm
February 22, 2020



Posts: 14


I heard that there is a special industry that produces easily accessible building materials from construction waste. How much cheaper is the general bill if you build a residential house from such materials? I had never thought about this before, but I would like to know about the benefits of this feature. Can someone make an approximate calculation?

1:57 am
February 23, 2020



Posts: 17


If you have a rough project, then you can order the estimated cost of such construction in an engineering company. I did this when I doubted which type of cable to use. These guys explained the pros and cons to me in detail - Special software helps to complete such an order faster than manual calculations.